Follow these six steps to take apart your IKEA MALM bed frame:
Step 1: Unscrew Crossbrace
First Remove the mattress, bedding and slats. Roll up the slats and secure them for moving.
Unscrew the crossbrace screws then remove crossbrace.
Leave the mounting plates on the headboard and footboard in place.
Step 2: Remove Mid-Beam
Pop the midbeam out of the mounting plates.
Step 3: Loosen Hex Bolts
Using the IKEA wrench tool loosen the hex bolts on each corner of the frame.
Step 4: Remove U-Shape Hardware
Loosen up andremove the U-shape hardwarewith your finger.
Step 5: Remove The Headboard
Carefully fist hammer the headboard from the side rail.
It's helpful having a friend to dis-assemble the bed with you at this point. Or find a step-stool/shoe box to hold up the side rail when the headboard is completely part from the bed sides.
Step 6: Remove The Footboard
Carefully fist hammer the footboard from the side rail.
Finished!
At this point you should have the following loose hardware:
- malm wrench
- U (half moon) shape hardware
- Hex Bolt
- crossbrace screws
And if you need replacement parts, see IKEA MALM Bed Frame Replacement Parts.
FAQs
Reinforcing a IKEA bed frame
- Use solid slats [just get 1×3 from lumber yard or Home Depot, et al], or buy a slat kit like this one.
- Add support legs to underside of center beam [we recommend using at least 2].
- Add support beams with legs.
The assembly process of the Malm Bed frame involves joining the different components together. This includes attaching the headboard, footboard, side panels, and support beams. On average, assembling these components takes approximately 45 minutes.
Does Malm bed frame need slats? ›
It is required for the stability of the bed frame and to keep the mattress in place. LURÖY slatted bed base is included in the price, but is packaged separately. Add 2 or 4 MALM bed boxes to create lots of extra storage space. Mattress and bedlinens are sold separately.
How do you spruce up an Ikea Malm bed? ›
Add a layer of upholstery.
Another cushy option, this DIY upholstered headboard hack from Place of My Taste uses the MALM as the headboard base. By adding additional plywood, you can get the look of a more grandiose bedroom. Grab your favorite fabric, some batting, and a staple gun to finish it off.
How much weight can IKEA Malm hold? ›
For this ottoman bed you need to use a mattress with a maximum weight of 110 lbs. If the mattress exceeds the maximum weight, the slatted base can suddenly fall and cause injury.This ottoman bed has been tested and meets the requirements for safety, durability and stability set forth by standard EN1725.
How to improve IKEA Malm? ›
Want something bold to spice up your living space? The IKEA Malm dresser could become your solution! Just simply paint the dresser your favorite a deep shade of red and add some designs, using simple washi tape. If you want more pops of color; display a colorful acrylic painting to place on top of the Malm!
Can you use a box spring with IKEA Malm? ›
The short answer is yes! Just make sure you have the SKORVA mid-beam to support your box spring.
What tools do I need to assemble an IKEA Malm bed? ›
A drill really comes in handy for this project, especially using the chuck to tighten these bolts. A drill will really speed this project up, along with a mallet. The 13mm wrench and allen keys you need to complete this project come with the kit, but you will need a screwdriver and hammer to finish this.
Is IKEA Malm bed solid wood? ›
A clean design with solid wood veneer.
Do IKEA beds have bed bugs? ›
Bed Bugs in Store-Bought Furniture
Bed bugs are often finding their way into new furniture and in stores such as IKEA. This is particularly true for those areas where bug infestations aren't cared for properly. Bed bugs crawl into small cracks and secluded areas where they can create their nests and lay their eggs.
Support for your mattress
Most IKEA bed frames come with bed slats, like these shown here. They sit within the bed frame and directly support your mattress. With some bed frames, it's also possible to use a bed base instead of bed slats.
Why is Ikea discontinuing Malm? ›
IKEA Reannounces Recall of MALM and Other Chests and Dressers Due to Serious Tip-over Hazard. Hazard: The recalled chests and dressers are unstable if they are not properly anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children.
How to make IKEA Malm look expensive? ›
Adding knobs, drawer pulls, and handles to your simple IKEA Malm dresser makeover, is the simplest IKEA hack that you can do. It can completely transform the look at a low cost. It is simply a matter of measuring and drilling holes for the screws to match your designated hardware.
Does the Malm bed frame squeak? ›
To stop an IKEA Malm bed from squeaking, you should first check the screws and bolts to make sure they are tightened properly. If that doesn't work, try adding a small amount of lubricant like WD-40 to the joints. You can also use furniture pads or felt strips to cushion the frame and reduce squeaking.
How can I make my IKEA furniture more durable? ›
A lick of paint or stain can add extra durability to wooden furniture such as tables, chairs and storage systems. They'll better withstand the knocks and scrapes of daily use.
How can I make my bed more sturdy? ›
Add more bed slats
If your bed frame is not very sturdy, you can add support by adding slats. A slat is a thin piece of wood that supports the mattress and gives it structure. You can buy premade bed slats or make them yourself, as needed (or both).
How can I make my slat bed stronger? ›
Strengthening bed slats often involves either replacing the existing slats with thicker, more durable ones or adding additional slats to reduce the gaps between them. The addition of a center support rail can also significantly strengthen the overall structure.
